Cure wavelength, dose, and matched UV spot system for DELO KATIOBOND OM614.

DELO KATIOBOND OM614's datasheet gives 320–380 nm, at 25 mW/cm² for 300 s. Confirm against the manufacturer's current datasheet and validate on your parts. It is covered by SunSpot 2, SkyBeam, SkyWand. Spec match, not a cure guarantee.

What wavelength cures DELO KATIOBOND OM614?

DELO KATIOBOND OM614's datasheet gives 320–380 nm, at 25 mW/cm² for 300 s. Confirm against the manufacturer's current datasheet and validate on your parts.

What UV dose cures DELO KATIOBOND OM614?

DELO KATIOBOND OM614's manufacturer datasheet (DELO KATIOBOND OM614 Technical Data Sheet) publishes 25 mW/cm² for 300 s. UV dose = intensity × time, so at a measured intensity you solve exposure time from the target dose. Verify with a radiometer at your working distance and validate on your parts.

Which UV spot system cures DELO KATIOBOND OM614?

All three systems we carry output the 320–380 nm DELO KATIOBOND OM614 needs, so the choice is about your process, not wavelength: the SunSpot 2 for bench and high-dose work, the SkyBeam for an automated line, and the SkyWand for field and rework. This is a spec match, not a cure guarantee, validate on your own parts.

Home›Cure Compatibility›DELO KATIOBOND OM614

UV Cure Compatibility

Curing DELO KATIOBOND OM614 With a UV Spot System

DELO KATIOBOND OM614 is a transparent cationic UV-cure epoxy for wafer-level optics. Its manufacturer's datasheet cures it at 320–380 nm, 25 mW/cm² for 300 s. Here is which Uvitron UV spot systems cover that wavelength, how to choose between them, and what to confirm before you run production.

Chemistry

a transparent cationic UV-cure epoxy for wafer-level optics

Cure wavelength

320–380 nm

Published dose

25 mW/cm² for 300 s

Atmosphere

Not stated

Specifications from DELO KATIOBOND OM614 Technical Data Sheet (read Jul 2026). View the Manufacturer Datasheet ↗

Which Systems Cover It

Wavelength Match

This adhesive cures at 320–380 nm. The dots are our LED wavelengths, the green ones land inside its band.

300350400450500

Our LED wavelengths

365 nm ✓385 nm −395 nm −405 nm −

1 of our LED wavelength land inside this band, so an LED system reaches it. The SunSpot 2 arc covers the whole range as well.

SunSpot 2 COVERS

Broadband Arc

Broadband 275–650 nm output spans this adhesive's 320–380 nm absorption at >18 W/cm² UVA, with the intensity headroom to reach a 25 mW/cm² for 300 s dose quickly.

SkyBeam COVERS

4-Channel LED

Its 365 nm LED channel falls inside this adhesive's 320–380 nm absorption, with per-channel timers and life logs for a logged, repeatable production cure.

SkyWand COVERS

Handheld LED

Its 365 nm handheld LED covers this adhesive for rework, field service, and parts too large for a bench.

Which One to Buy

All three systems output the 320–380 nm this adhesive needs, so choose by how you cure, not by wavelength:

Bench

SunSpot 2

Bench work, and the highest intensity for thick or high-dose cures.

Automated Line

SkyBeam

A fixtured or automated line with logged, per-channel cures.

Field & Rework

SkyWand

Rework, field service, and parts too big for a bench.

Get a Quote, We'll Match the System to Your Process →

Cure Recipe Calculator

DELO KATIOBOND OM614's datasheet implies about 7500 mJ/cm² (25 mW/cm² for 300 s). Measure the intensity your system delivers at the working distance with a radiometer, and this gives the exposure time for that dose, since dose = intensity × time.

Your measured intensity
mW/cm²

Estimate only. Cure also depends on film thickness, geometry, substrate, and inhibition, so qualify the result on your own parts.

Read This Before You Rely on It. These are the manufacturer's published specifications, not our own test results. Whether a cure fully succeeds also depends on your film thickness, joint geometry, substrate, and lamp distance, so always validate the cure on your own parts and process, and confirm the numbers against the manufacturer's current datasheet.

DELO KATIOBOND OM614 and other product names are trademarks of their respective owners. UV Spot Shop is an independent equipment supplier and is not affiliated with, authorized by, or endorsed by DELO.

Related Adhesives

DELO PHOTOBOND GB368 320–420 nm · Any of the 3 systems DELO PHOTOBOND AD494 320–400 nm · Any of the 3 systems DELO PHOTOBOND GB310 365 nm · Any of the 3 systems DELO PHOTOBOND GB345 365 nm · Any of the 3 systems DELO DUALBOND OB786 365 nm · Any of the 3 systems Loctite AA 3105 365 nm · Any of the 3 systems

MoreAll Adhesives ›·By Chemistry Family ›·Dose Calculator ›

Know Your Adhesive, Need the System?

Published pricing, US stock, and the matched system + light guide on one quote, response within 1 business day.

Request a Quote