Curing DELO PHOTOBOND AD494 With a UV Spot System
DELO PHOTOBOND AD494 is a modified-acrylate UV/visible adhesive. Its manufacturer's datasheet cures it at 320–400 nm. Here is which Uvitron UV spot systems cover that wavelength, how to choose between them, and what to confirm before you run production.
Specifications from DELO PHOTOBOND AD494 Technical Data Sheet (read Jul 2026). View the Manufacturer Datasheet ↗
Which Systems Cover It
Worth Knowing: DELO rates it best around 400 nm; SkyBeam’s 405 nm channel or the broadband SunSpot 2 suit it better than a pure 365 nm source.
All three systems output the 320–400 nm this adhesive needs, so choose by how you cure, not by wavelength:
Read This Before You Rely on It. These are the manufacturer's published specifications, not our own test results. Whether a cure fully succeeds also depends on your film thickness, joint geometry, substrate, and lamp distance, so always validate the cure on your own parts and process, and confirm the numbers against the manufacturer's current datasheet.
DELO PHOTOBOND AD494 and other product names are trademarks of their respective owners. UV Spot Shop is an independent equipment supplier and is not affiliated with, authorized by, or endorsed by DELO.

